You may have noticed a rowing machine, otherwise known as an ergometer or “erg,” gathering dust in the corner of your neighborhood gym or as Frank and Claire Underwood’s workout of choice in House of Cards.
If you’re a CrossFitter, there’s a good chance you’ve probably even used one in a workout before.
There’s also a good chance you’re using it all wrong.
While a rowing machine workout is an incredibly efficient, full-body training technique that allows the athlete to build aerobic endurance and muscular strength at the same time, a lack of proper technique and training is common among gym-goers and can lead to injuries and misuse.
So we asked experts from the number one collegiate men’s crew team in the country at the University of California – Berkeley—Head Coach Mike Teti and Associate Head Coach Scott Frandsen—to give you the lowdown on everything you need to know about the rowing machine.
Both are Olympic medalists (Teti is both a medalist as an athlete and a coach) who know exactly what it takes, in the gym and on the water, to get in gold medal-winning shape.
In order to get the most out of your time on the rowing machine you should:
- Incorporate these erg workouts into your fitness routine.
- Make sure to avoid the following common mistakes and always keep an eye on technical focuses during the workout, even when you’re feeling fatigued.
- Take some time to get to know the machine itself and understand the way the screen settings work.
How to Use a Rowing Machine: Proper Technique
Olympic rowers and experienced collegiate crews make the rowing stroke look easy and pretty darn effortless. But make no mistake, the rowing stroke is nuanced, complex, and can take years to master on the water.
Luckily for those of you at the gym, the erg is a far simpler machine that can be perfected with some basic knowledge of technique and a little bit of practice.
The “catch” is the beginning of the stroke. “Here, you are at full compression forward and taking the weight of the stroke,” says Teti. If you were in an actual rowing boat, you could visualize the blade as entering the water and “catching” the weight of its resistance.
The “drive” describes the basic sequence of the rowing stroke, which is legs first, then back, and finally arms. A few common mistakes to avoid are pulling with your arms first or opening up with your shoulders before you’ve driven the legs down.
“I always liken the movement to a power clean and stress the importance of holding a strong body angle while pushing the legs down and then accelerating through with the body and then arms,” says Frandsen.
Quite literally, the “finish” of the stroke. After completing the stroke sequence, you should be “sitting with your legs flat, shoulders behind your hips, and the handle drawn horizontally to the body at the lower ribs,” according to Teti.
When you rest! From the “finish” position, the correct sequence is to move the hands away from the body first, then pivot from the hips to get back into that strong body position forward (your shoulders should be in front of your hips) and finally break the knees to roll up the slide to the starting “catch” position.
“This movement should be blended together so as not to be too rigid, but the handle needs to get out past your knees before you start to roll up the slide so the handle doesn’t have to go up and over your knees,” says Teti.
It can also be helpful to keep in mind that the handle should remain on one horizontal plane for the entire stroke and recovery, instead of bobbing up and down.
5. Body Swing/Posture
“I always try to reinforce the need to swing over from the hips and not simply by curving you back. This is crucial to avoid injury and to get you into a stronger position to be ready for the next stroke,” says Frandsen.
Even as you start to get tired or feel fatigued, don’t allow yourself to slouch or to collapse into the “catch”–swing over early in the stroke and then think about your chest rising up to the catch.
Rowing Machine Settings You Should Know
1. Fan Setting
A common misconception is that putting the fan setting up to 10 is somehow better or harder, but Frandsen completely disagrees. “In my 18 years of rowing, I never trained on the erg at anything over a fan setting of 3 or 4.
Anything higher puts a lot of unnecessary load on the body at the beginning of the stroke and can lead to injuries,” says Frandsen. He recommends keeping the fan setting low and working on posture and quickness around the catch to pick up the resistance, instead of depending on the machine to give you that heavy load.
The “split” refers to how much time it would take you to cover 500 meters if you maintain that split. For example, if you are holding a 1:45 split, then it will take you 1 minute, 45 seconds to cover 500 meters.
“It’s a great way to see if your training (and technique) is paying off with improved splits,” says Frandsen. You are able to program your workout by going to “Select Workout,” then “New Workout,” and then inputting your work intervals based on time or distance, as well as your rest interval.
3. Navigating the Screen
The most recent models of the erg, produced by Concept 2 (pictured above), have a screen with different options for what measurements or figures you want to see during your workout.
Using the screen, you can monitor calories expended and watts produced, but “the vast majority of rowers will set the screen to track their 500-meter split or just simply ‘split,’” according to Teti.
The stroke rate, which appears on the screen as “SPM,” refers to the number of strokes you are taking per minute. Typically the split and stroke rating have an inverse relationship, meaning that when you increase your stroke rating, the split should go down.
Rowing Machine Workouts
For the workouts, it’s not only critical to make sure that you maintain proper technique, but also that “you are properly warmed up for these workouts, especially the power sessions,” says Frandsen.
He recommends starting slowly by adding one or two of these sessions, most of which are between 30 and 40 minutes in duration, per week before your strength training workout and then build from there.
*During the rest periods, you could take a few minutes to lightly paddle out on the rowing machine and then use the remaining time to stand up, stretch your legs, and grab a quick drink.
1. Power 20’s
Sets: 2 Reps: 8 Rate: 20-24 strokes per minute
How to do it:
- Take 20 strokes as powerfully as you can while still maintaining correct technique.
- Then take 10 strokes very lightly.
- That’s one rep.
- Rates for these power strokes should be between 20 and 24 strokes per minute.
The goal should be to hold as low of a split as possible for each 20-stroke piece. Use the light strokes in between reps to regain length and correct your posture. Take a short break, no longer than 6 minutes, between the sets.
2. Row 1 Minute On, 1 Minute Off
Sets: 3 Reps: 5 Rate: 18, 20, 22, 24, 26 (+2 on each rep, for each set)
How to do it:
- Row for 1 minute applying as much power and force as you can.
- Then take 1 minute of very light strokes for rest.
- That’s one rep.
- Complete 5 reps and then take a short break, no more than a few minutes, before moving on to the next set.
Similarly, the goal is to hold the lowest split possible in the hard pieces. The prescribed stroke rates are 18, 20, 22, 24, and 26 for the first set; 20, 22, 24, 26, and 28 for the second; and 22, 24, 26, 28, and 30 for the third.
3. Row 1,000 Meters
Sets: 4 Rest: 7 minutes between each set
How to do it:
- There isn’t a prescribed stroke rate for this workout, but it is important to make sure that you are keeping full length on the slide (legs).
- Be careful not to shorten up or scramble, as this will negatively affect technique and posture.
The target is to hold the lowest average split possible, at a sprint pace that would be unsustainable over longer distances, for all four pieces. According to Frandsen, a competitive rower would “take advantage of every second of rest to ensure that each piece is of the highest intensity.”
4. Row 8 Minutes
Sets: 3 Rest: 6 minutes between each set Rates: First four minutes at 24, then two minutes at 26, and last 2 minutes at 28
These pieces are set at mid-range rates with lots of rest between. Just like the 1,000-meter workout, you’ll want to take advantage of the long rest so that each piece is of the highest quality possible. The set rates step up throughout the piece, meaning that with each step up in rate, your 500-meter split should go down.
5. Row 10 Minutes
Sets: 3 Rest: 3 minutes between each set Rates: First 3 minutes at 20, then 4 minutes at 22, and last 3 minutes at 24
How to do it:
- Now we start to decrease the intensity and increase the volume of these workouts, which will improve overall endurance and stamina.
- Complete this workout, 10 minutes of rowing at a hard steady-state pace (that’s one set), and take 3 minutes of rest between each set.
- The rates are set slightly lower so you should be able to focus on technique and solidify your posture at the catch, as well improving overall stroke length.
6. Row 3,000 Meters
Sets: 3 Rest: 4 minutes between each set Rates: 1,000 meters at 20, 1,000 meters at 22, and 1,000 meters at 24 for each set
How to do it:
- Complete this workout at a hard steady-state intensity throughout.
- Stick to the prescribed rates for each set and continue to work on improving length and posture.
7. Row 6 Minutes
Sets: 6 Rest: 2 minutes between each set Rates: The prescribed rate for each set is as follows: the first set at 18; then 20; 22; 20; 22; and the final set at 24
How to do it:
- Row 6 minutes at a challenging pace, focusing on maximum application of strength and power.
- That’s one set.
- Use the short, 2-minute rest to stand up and stretch between each set, but don’t let your heart rate come down too much.
This workout increases overall volume, while reining in the intensity.
8. Row 20 Minutes
Sets: 2 Rest: 5 minutes between each set Rates: First 5 minutes at 20, then 10 minutes at 22, and last 5 minutes at 24
This a very standard rowing workout, designed to stretch volume at a steady, attainable pace. The focus should be on maintaining a solid 500-meter split (not too high, not too low) and working on technique and length.
9. Row 15 Minutes
Sets: 3 Rest: 3 minutes between each set Rates: First 5 minutes at 20, middle 5 minutes at 22, and last 5 minutes at 24
How to do it:
- Continue to stretch the volume at lower rates and with shorter rest.
For access to exclusive gear videos, celebrity interviews, and more, subscribe on YouTube!